Yearly Archives: 2012

Water Softening Systems

Hard water is found in many water supplies across the country. Hardness is the measurement of the concentration of calcium and magnesium compounds found in water. These compounds enter the water system from groundwater sources. Calcium and magnesium compounds can become separated from the water and cause scaling in equipment and piping. Scale can decrease fixture flow rates, decrease

Continue Reading →

Why Your Freeze Stat Trips

A freeze stat is a sensor located in your HVAC system that is designed to minimize the potential of freezing a water or steam coil in your air distribution system.  A true freeze stat is directly interlocked to shut down equipment and requires a manual reset if it trips.  This is different than a low

Continue Reading →

Electronically Commutated Motors

Electronically commutated motors (ECMs) have quickly become standard in the HVAC industry. They can have unexpected operating characteristics that are very different than their predecessor; the alternating current (AC) permanent split capacitor (PSC) motor. An ECM is a brushless, direct current (DC) motor that operates at a synchronous speed. ECMs utilize integral inverters so they

Continue Reading →

Natatorium Corrosion Is A Medley of Factors

Natatoriums are typically the most corrosive environment that facility staff will maintain. The design architect, HVAC engineer, and pool consultant need to reduce the factors that lead to corrosion, but all the designers involved and the facility personnel need to be keenly aware of the cause of natatorium corrosion. The primary drivers of corrosion in the natatorium

Continue Reading →

Relative Humidity is “Relative”

Psychrometrics can be a complicated field of study. However, a psychrometric chart can be a simple, invaluable tool to help HVAC engineers and owners understand the relationship between air temperature and humidity.  Relative humidity (RH) is a term that most people are familiar with, but its relationship with dry bulb (DB) temperature is typically under-appreciated.  RH

Continue Reading →

The Days of the Simple Wall Switch Are Gone!

The days of providing a simple wall switch to control lighting are GONE. The last few revisions of the energy codes, whether the International Energy Conservation Code or ASHRAE 90.1, has continually increased lighting control complexity. However, with this complexity significant energy reduction, and thus lower operating costs, can be achieved resulting in relatively short

Continue Reading →

High Efficiency Replacement Boilers

As we leave the heating season, many building owners begin repair and replacement projects in their boiler plants. Boilers that burn fuel to heat water have been around for thousands of years and technologies that we would recognize today date back to the early 1700’s. More recent trends in boiler construction and control focus on

Continue Reading →

Training Saves The Day!

At the end of most construction projects, there is a warranty period, but not all mechanical failures and problems occur within the warranty period. Sound familiar? One option is to get a service agreement from another company or local contractor; however this can be costly, especially if only minor repairs are required when the building

Continue Reading →

WELCOME 2012! Are You Ready For A Change?

No, we’re not trying to make a political statement. Whether or not there will be a change in the White House this year, there are changes coming for the construction industry. In 2012, the new version of the International Building Code (IBC) family is being issued. Depending on your jurisdiction, the 2012 version of the

Continue Reading →



arc flash Building Information Modeling central plant Chilled Water chiller commissioning Controls Covid-19 Data Center demand controlled ventilation Emergency power Energy FGI Guidelines geothermal heat pump LED LED Lighting LEED lighting Master Plan Pharmacy Power Retro-commissioning service Steam Sustainability